Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Caprice 3.6L Eng VIN 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement - Bank 1 >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Ignition Coil To Camshaft Cover Retaining Bolts
    GM1949892Courtesy of GENERAL MOTORS COMPANY
  1. Install the ignition coils (2) to the vehicle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the ignition coil to camshaft cover retaining bolts (1) and tighten to 10 (89 lb in).
  3. Install the ignition coil harness connectors to the ignition coils.
  4. If replacing cylinder number 3 coil, install the evaporative emission canister purge valve. Refer to Evaporative Emission Canister Purge Solenoid Valve Replacement .
scientia non olet · About Mike's Workshop Manuals