Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Caprice 3.6L Eng VIN 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake >> Installation Procedure

Installation Procedure

    Fig 1: Identifying CMP Sensor To Engine Front Cover Retaining Bolt
    GM1949777Courtesy of GENERAL MOTORS COMPANY
  1. Install the CMP sensor (2) to the engine.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the CMP sensor to engine front cover retaining bolt (1) and tighten to 10 (89 lb in).
    3. Fig 2: Identifying CMP Sensor & Electrical Connector
    GM1949776Courtesy of GENERAL MOTORS COMPANY
  3. Install the CMP sensor electrical connector (1) to the CMP sensor (2).
  4. Install the water outlet housing.
  5. Install the power steering reservoir to the power steering reservoir bracket. Refer to Power Steering Fluid Reservoir Replacement (V6) .
scientia non olet · About Mike's Workshop Manuals