Circuit/System Description

The Instrument Cluster illuminates the Traction/stability Control, Traction Control Off, and the Stability Control Off indicator for five seconds after ignition ON. The Electronic Brake Control Module will request the Instrument Cluster via serial data to turn the Traction/stability Control, Traction Control Off, and the Stability Control Off indicator ON when a fault is set or when the vehicle is entering the performance traction mode. When the Electronic Brake Control Module detects a fault it sends a serial data message to the Instrument Cluster commanding the Traction/stability Control indicator ON.

The Body Control Module monitors the traction control switch. When the traction control switch is pressed once, the Body Control Module will request the Electronic Brake Control Module via serial data to disable the traction control. When the Traction Control Switch is pressed twice within five seconds the performance traction mode is available and enters the Performance Traction Control Mode 2-Dry. The Electronic Brake Control Module will request the Instrument Cluster via serial data to turn the Traction Control Off indicator and Stability Control Off indicator ON to notify the driver of the deactivation.