Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Volt >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> DTC P0CC6 >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the S113 charge port door unlatch switch.
  2. Test for infinite resistance between the signal terminal 2 and the B+ terminal 1 with the switch in the open position.
    • If not the specified value, replace the S113 charge port door unlatch switch.
  3. Test for less than 2 Ω between the signal terminal 2 and the B+ terminal 1 with the switch in the closed position.
    • If greater than the specified range, replace the S113 charge port door unlatch switch.
scientia non olet · About Mike's Workshop Manuals