Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Volt >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Fixed And MOVEABLE Windows) >> Repair Instructions >> Liftgate Upper Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the liftgate window into the opening. Refer to Adhesive Installation of Liftgate Windows (Upper)  or Adhesive Installation of Liftgate Windows (Lower) .
  2. Install the rear end spoiler. Refer to Rear End Spoiler Replacement .
  3. Connect the liftgate window defogger electrical connectors to the bus bar.
  4. Install the rear window radio and Onstar® antenna connects.
  5. Install the liftgate lower trim finish panel. Refer to Liftgate Lower Trim Finish Panel Replacement and Liftgate Lower Trim Finish Panel Replacement .
  6. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  7. Close the liftgate.
scientia non olet · About Mike's Workshop Manuals