Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Volt >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> DTC P0CC6 >> Component Testing

Component Testing

  1. Vehicle OFF, disconnect the harness connector at the S113 charge port door open request switch.
  2. Test for infinite resistance between the signal terminal 2 and the B+ terminal 1 with the switch in the open position.
    • If less than infinite resistance 

      Replace the S113 charge port door open request switch.

    • If infinite resistance 
  3. Test for less than 3 Ω between the signal terminal 2 and the B+ terminal 1 with the switch in the closed position.
    • If 3 Ω or greater 

      Replace the S113 charge port door open request switch.

    • If less than 3 Ω 
  4. All OK
scientia non olet · About Mike's Workshop Manuals