Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine Control System & Fuel System - 2.8L, 3.0L - Repair Instructions) >> Repair Instructions >> Fuel Line Replacement - Chassis >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Fuel Feed Line & Plastic Retainers
    GM2235267Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel feed line (3) into the plastic retainers (2).
  2. Connect the fuel feed line quick connect (1). Refer to Plastic Collar Quick Connect Fitting Service .
  3. Install the fuel pressure sensor. Refer to Fuel Pressure Sensor Replacement - Fuel Feed Pipe .
    4. Fig 2: Identifying Fuel Feed Line & Plastic Retainer
    GM2234990Courtesy of GENERAL MOTORS CORP.
  4. Engage the fuel feed line (1) to the plastic retainer (2).
    5. Fig 3: Identifying Fuel Feed Line
    GM2233421Courtesy of GENERAL MOTORS CORP.
  5. Connect the fuel feed line (1). Refer to Metal Collar Quick Connect Fitting Service .
scientia non olet · About Mike's Workshop Manuals