Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Install NEW fuel injector seals.

Fig 1: Locating Fuel Injector

Courtesy of GENERAL MOTORS CORP.

Install the fuel injector.

Fig 2: Identifying Fuel Injector Retainer Clip

Courtesy of GENERAL MOTORS CORP.

Install the fuel injector retainer clip.

Fig 3: View Of Fuel Injector Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the fuel injector electrical connector.
Engage the fuel injector electrical connector lock.

Fig 4: Identifying Fuel Rail Bolts

Courtesy of GENERAL MOTORS CORP.

Install the fuel rail with the fuel injectors.

CAUTION: Refer to Fastener Caution .

Install the fuel rail bolts.
Tighten: Tighten the fuel rail bolts to 10 N.m (89 lb in).

Fig 5: Top Of Engine View

Courtesy of GENERAL MOTORS CORP.

Connect the fuel feed pipe (2) to the fuel rail. Refer to Metal Collar Quick Connect Fitting Service .

Fig 6: View Of Fuel Pipe Retainer

Courtesy of GENERAL MOTORS CORP.

Install the fuel pipe retaining clip.
Install the upper intake manifold. Refer to Upper Intake Manifold Replacement .