Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Adjustable Pedal System) >> Diagnostic Information and Procedures >> DTC B3607 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, verify that no other adjustable pedal DTCs are set.
  2. Observe the scan tool Adjustable Pedals Softstop Learn Status parameter. The parameter reading should be learned.
    • If not the specified value, perform the scan tool Learn Adjustable Pedals Softstops procedure. Refer to Adjustable Pedal System Calibration . If the DTC resets, replace the K40 memory seat control module.
scientia non olet · About Mike's Workshop Manuals