Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Rear Drive Axle) >> Diagnostic Information and Procedures >> DTC C0574: Printed Circuit Board Temperature Sensor >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool Rear Differential Clutch Control Module Temperature parameter is between -40°C (-40°F) and 115°C (239°F).
    • If not between -40°C (-40°F) and 115°C (239°F) 

      Refer to Circuit/System Testing.

    • If between -40°C (-40°F) and 115°C (239°F) 
  3. All OK.