Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Ignition and Start Switch Replacement

Ignition and Start Switch Replacement

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ignition And Start Switch
GM1867265Courtesy of GENERAL MOTORS COMPANY
Ignition and Start Switch Replacement

Callout Component Name
Preliminary Procedure 
Remove the ignition and start switch housing. Refer to Ignition and Start Switch Housing Replacement .
1 Ignition and Start Switch Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
2 Ignition and Start Switch
scientia non olet · About Mike's Workshop Manuals