Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Battery, Charging System And Starting System) >> Repair Instructions >> Auxiliary Battery Positive Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Fuse Block Cover
    GM2235660Courtesy of GENERAL MOTORS CORP.
  1. Remove the battery fuse block cover (1).
  2. Disconnect the negative battery cable.Refer to Battery Negative Cable Disconnection and Connection 
  3. Remove the auxiliary battery positive terminal nut (2) from the fuse block.
  4. Fig 2: View Of Auxiliary Battery Positive Cable
    GM2232747Courtesy of GENERAL MOTORS CORP.
  5. Remove the nut (1) from the rear of the generator
  6. Remove the nut (2) from the starter solenoid.
  7. Remove the auxiliary battery positive cable from the vehicle.