Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Battery, Charging System And Starting System) >> Repair Instructions >> Auxiliary Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Ground Harness Wire Terminal & Negative Battery Clamp
    GM2232745Courtesy of GENERAL MOTORS CORP.
  1. Remove the battery fuse block cover/engine control module(ECM).
  2. Loosen the auxiliary negative battery post terminal nut (1) and remove the auxiliary negative battery post clamp.
  3. Remove the auxiliary negative battery ground bolt (2).
    4. Fig 2: Locating Engine Block Battery Ground Terminal & Bolt
    GM2235595Courtesy of GENERAL MOTORS CORP.
  4. Remove the auxiliary negative battery terminal (1) and bolt (2) from the left front engine block.
  5. Remove the auxiliary negative battery cable.
scientia non olet · About Mike's Workshop Manuals