Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Interior Trim And Interior Paneling) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Center Pillar Assist Handle Screw 1.2 N.m 10 lb in
Coat Hook Screw 9 N.m 80 lb in
Front Side Door Trim Panel Bolts 2 N.m 18 lb in
Liftgate Trim Finish Panel Screws 2 N.m 18 lb in
Rear Quarter Upper Trim Panel Screws 3 N.m 27 lb in
Rear Quarter Lower Trim Panel Screws 3 N.m 27 lb in
Rear Side Door Trim Panel Screws 2 N.m 18 lb in
Sunshade Anchor Screws 3 N.m 25 lb in
Sunshade Screws 3 N.m 25 lb in
Windshield Pillar Garnish Molding Bolts 2 N.m 18 lb in
scientia non olet · About Mike's Workshop Manuals