Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls/Fuel - 3.6L - DTC P0010 To DTC P0338 >> Diagnostic Information and Procedures >> DTC P0107 or P0108 >> Circuit/System Verification

Circuit/System Verification

  1. Verify that DTC P0641, P0651, or P0697 is not set.
  2. Ignition ON, observe the scan tool MAP Sensor parameter. The reading should be between 0.20-4.80 V.
  3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.