Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Tahoe SSV >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Engine Wiring Harness, Clip, Bolt & Connector
    GM1696914Courtesy of GENERAL MOTORS COMPANY
  1. Remove the generator. Refer to Generator Replacement .
  2. Remove the power steering pump. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L, and 6.2L) .
  3. Remove the engine wiring harness clip bolt (3) are reposition the clip (1) away from the generator bracket.
    4. Fig 2: View Of Generator Bracket & Bolts (4.8L, 5.3L & 6.0L)
    GM847280Courtesy of GENERAL MOTORS COMPANY
  4. Remove the generator bracket bolts.
  5. Remove the generator bracket.
scientia non olet · About Mike's Workshop Manuals