Spark Plug Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Spark Plugs

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Open the hood. Remove the engine sight shield. Remove the ignition coil. Refer to Ignition Coil Replacement .
1	Spark Plugs CAUTION: Refer to Fastener Caution . Tighten 25 N.m (18 lb ft) Special Tools EN-194-E Spark Plug Remover For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Preliminary Procedure

Spark Plugs

CAUTION:

Tighten
25 N.m (18 lb ft)
Special Tools
EN-194-E Spark Plug Remover
For equivalent regional tools, refer to Special Tools .