Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls/Fuel - 1.4L - Repair Instructions) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Fuel Tank Pressure Sensor, Wiring Harness Plug And Pump Module Clip
    GM2595045Courtesy of GENERAL MOTORS COMPANY
  1. Clip the fuel tank pressure sensor (3) to the fuel tank pump module clip (1).
  2. Connect the fuel tank pressure sensor wiring harness plug (2).
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About Mike's Workshop Manuals