Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Cruise Control System) >> Diagnostic Information and Procedures >> Cruise Control Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, perform the scan tool Lamp Test. Verify the cruise control indicator illuminates.
    • If the indicator does not illuminate, replace the K9 BCM.
  2. Replace the K20 ECM.
scientia non olet · About Mike's Workshop Manuals