Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Tail Pipe Flow Control Valve Solenoid Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Tail Lamp Lens Screw
    GM1674357Courtesy of GENERAL MOTORS COMPANY
  1. Removal the right inner tail lamp lens screw.
    2. Fig 2: Identifying Tail Lamp Lens
    GM1674355Courtesy of GENERAL MOTORS COMPANY
  2. Removal the right inner tail lamp lens.
    3. Fig 3: View Of Inner Tail Lamp Removed
    GM1674345Courtesy of GENERAL MOTORS COMPANY
  3. Working through the tail lamp opening, disconnect the electrical connector.
    4. Fig 4: View Of Vacuum Line Components
    GM1674344Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the vacuum hose from the solenoid.
  5. Remove the solenoid.
scientia non olet · About Mike's Workshop Manuals