Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 GMC Savana, 2013 GMC RV Cutaway, 2013 GMC Cutaway, 2013 Chevrolet RV Cutaway, and 2013 Chevrolet Express. However, it is still accessible from the selected car via links, so may be relevant.
- Snap the stop lamp switch onto the pushrod to the power brake booster.
- Install the stop lamp switch with the pushrod on the brake pedal pin.
- Install brake switch retainer.
- Connect the electrical connector to the stop lamp switch.
- Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .