Installation Procedure

WARNING: This page is about a different variant/trim than selected.

NOTE:

When ordering new fuel injectors, be sure to order the correct injector for the application being serviced.

Fig 1: Exploded View Of Fuel Meter Body Assembly

Courtesy of GENERAL MOTORS COMPANY

Lubricate the NEW injector O-ring seals with clean engine oil.
Install the fuel injector (2) into the fuel meter body injector socket.
CAUTION:
Refer to Fastener Caution .
Install the injector retainer (3) and the injector retainer lock nuts (4), then tighten to 3 N.m (27 lb in).
Install the fuel meter body. Refer to Fuel Injector Fuel Meter Body Replacement .