Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Chevy Express H1500, Van Cargo >> Repair and Diagnosis >> External Pages >> Different car >> Section 2373 (Shift Lock Control System) >> Repair Instructions >> Automatic Transmission Shift Lock Control Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2013 GMC Savana, 2013 GMC RV Cutaway, 2013 GMC Cutaway, 2013 Chevrolet RV Cutaway, and 2013 Chevrolet Express. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Automatic Transmission Shift Lock Control Actuator
    GM324906Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to SIR Warning .

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Put the shift lever clevis into the neutral position.
  3. Remove the knee bolster. Refer to Driver Knee Bolster Replacement .
  4. Disconnect the electrical connector.
  5. Use a small screwdriver to pry the A/T shift lock control actuator away from the steering column jacket assembly and the cable shift cam assembly.
  6. Remove the A/T shift lock control actuator.
scientia non olet · About Mike's Workshop Manuals