Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Chevy Express H1500, Van Cargo >> Repair and Diagnosis >> External Pages >> Different car >> Section 2334 (Keyless Entry System And Remote Functions) >> Diagnostic Information and Procedures >> Remote Vehicle Start Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 GMC Savana, 2013 GMC RV Cutaway, 2013 GMC Cutaway, 2013 Chevrolet RV Cutaway, and 2013 Chevrolet Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that RVS is enabled through vehicle personalization.
    • If RVS is not enabled, use vehicle personalization to turn on RVS functionality. Refer to the vehicle owners manual.
  2. Verify that the keyless entry functions operate with all available keyless entry transmitters.
  3. Observe the scan tool ECM and BCM RVS Disable History parameters, Verify that no RVS Disable History items are present.
    • If RVS Disable History items are present, refer to the appropriate subsection in which the failure occurred.
scientia non olet · About Mike's Workshop Manuals