Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Chevy Express H1500, Van Cargo >> Repair and Diagnosis >> External Pages >> Different car >> Section 2332 (Power Door Lock System And Release Systems) >> Repair Instructions >> Door Control Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2013 GMC Savana, 2013 GMC RV Cutaway, 2013 GMC Cutaway, 2013 Chevrolet RV Cutaway, and 2013 Chevrolet Express. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Sliding Side Door Control Assembly & Bolts
    GM333917Courtesy of GENERAL MOTORS COMPANY
  1. Install the sliding side door control assembly (3) to the vehicle.
  2. Install the sliding side door control assembly (3) to the sliding side door.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the bolts (4) in order to retain the sliding side door control assembly (3) to the sliding side door and tighten to 10 N.m (89 lb in).
    4. Fig 2: Sliding Side Door Control Assembly Lock Rods
    GM333927Courtesy of GENERAL MOTORS COMPANY
  4. Install the lock rods to the sliding side door control assembly.
  5. Install the sliding side door lower trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement .
scientia non olet · About Mike's Workshop Manuals