Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Chevy Express H1500, Van Cargo >> Repair and Diagnosis >> External Pages >> Different car >> Section 1926 (Power Door Lock System And Release Systems) >> Repair Instructions >> Door Lock Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 GMC Savana and 2011 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector From Power Window/Door Lock/Mirror Switch
    GM333969Courtesy of GENERAL MOTORS CORP.
  1. Install the power door lock switch (7) to the front door trim plate (1).
  2. Press on the power door lock switch (7) in order to engage the retaining tabs.
  3. Install the electrical connector (5) to the power door lock switch (7).
  4. Install the front door trim plate. Refer to Front Door Trim Plate Replacement .
scientia non olet · About Mike's Workshop Manuals