Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Chevy Express H1500, Van Cargo >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions (Battery, Charging System And Starting System) >> Battery Current Sensor Replacement >> Removal Procedure (Battery, Charging System And Starting System)

Removal Procedure (Battery, Charging System And Starting System)

    Fig 1: View Of Battery Current Sensor
    GM1475086Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the instrument panel (I/P) harness electrical connector (1) from the battery current sensor.
  2. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (V6) , Battery Negative Cable Replacement (LGH - Primary) , Battery Negative Cable Replacement (V8) .
  3. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
  4. Squeeze the negative battery cable branches together.
    5. NOTE:

    Note the position of the battery current sensor prior to removal.

  5. Slide the battery current sensor (1) off of the negative battery cable.
scientia non olet · About Mike's Workshop Manuals