Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Chevy Express H1500, Van Cargo >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions (Battery, Charging System And Starting System) >> Battery Current Sensor Replacement >> Installation Procedure (Battery, Charging System And Starting System)

Installation Procedure (Battery, Charging System And Starting System)

    Fig 1: View Of Battery Current Sensor
    GM1475086Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Ensure that the tape tab is pointing away from the battery prior to installation.

  1. Slide the NEW battery current sensor (1) up onto the negative battery cable.
  2. Using NEW tie straps and electrical tape, attach the battery current sensor to the negative battery cable.
  3. Install the negative battery cable. Refer to Battery Negative Cable Replacement (V6) , Battery Negative Cable Replacement (LGH - Primary) , Battery Negative Cable Replacement (V8) .
  4. Connect the I/P harness electrical connector to the battery current sensor.
scientia non olet · About Mike's Workshop Manuals