Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Captiva Sport LS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Engine Controls/Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Tank Pressure Sensor
    GM1885238Courtesy of GENERAL MOTORS COMPANY
  1. Install the fuel tank pressure sensor (2) to the fuel pump module assembly until the sensor engages the retaining tab (1).
    2. Fig 2: Fuel Tank Wiring Harness Electrical Connector
    GM1885236Courtesy of GENERAL MOTORS COMPANY
  2. Connect the fuel tank wiring harness electrical connector (1) to the fuel tank pressure sensor.
  3. Install the fuel tank. Refer to Fuel Tank Replacement (AWD) , Fuel Tank Replacement (FWD) .
scientia non olet · About Mike's Workshop Manuals