Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Captiva Sport LS, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Heating System And Seat Cooling System >> Repair Instructions >> Front Seat Heater Control Module Replacement

Front Seat Heater Control Module Replacement

Fig 1: Front Seat Heater Control Module
GM1868511Courtesy of GENERAL MOTORS COMPANY
Front Seat Heater Control Module Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
  2. Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement (without KA1) , Front Seat Cushion Cover and Pad Replacement (with KA1) .
1 Front Heated Seat Control Module Rivets (Qty: 2)

Procedure

  1. Drill out the head of the rivet to remove the module.
  2. Install new rivets for installation.
2 Front Heated Seat Control Module

Procedure

  1. Disconnect the electrical connector.
  2. Check to make sure the heated seats are functioning properly.
scientia non olet · About Mike's Workshop Manuals