Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Caprice 6.0 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Lighting System) >> Repair Instructions >> Turn Signal Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Caprice. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING:

    Refer to Battery Disconnect Warning .

  1. Disconnect the battery ground cable from the battery. Refer to Battery Negative Cable Disconnection and Connection (Primary) , Battery Negative Cable Disconnection and Connection (Auxiliary) .
  2. Remove the upper and lower steering column trim covers. Refer to Steering Column Trim Cover Replacement .
    3. Fig 1: Electrical Connector
    GM1947050Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the turn signal switch (2) electrical connector (1).
    4. Fig 2: Turn Signal Switch
    GM1947048Courtesy of GENERAL MOTORS CORP.
  4. Press the retaining tabs (2) on the turn signal switch (1) and pull the turn signal switch assembly away from the steering column.
scientia non olet · About Mike's Workshop Manuals