Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2012 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls/Fuel - 6.2L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement - Left Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    WARNING:

    Refer to Gasoline/Gasoline Vapors Warning .

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: Secondary Fuel Tank Module Electrical Connector
    GM2195512Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the secondary fuel tank module electrical connector (1).
    3. Fig 2: Lock Ring
    GM2195514Courtesy of GENERAL MOTORS COMPANY
  3. Rotate the lock ring (1) counterclockwise using the CH-48482  wrench and remove the lock ring.
    4. Fig 3: Fuel Transfer Hose Quick Connect Fitting
    GM2195521Courtesy of GENERAL MOTORS COMPANY
  4. Partially remove the primary fuel tank module in order to disconnect the fuel transfer hose quick connect fitting (1). Refer to Plastic Collar Quick Connect Fitting Service .
    5. Fig 4: Secondary Fuel Tank Module & Seal
    GM2195525Courtesy of GENERAL MOTORS COMPANY
  5. Remove the secondary fuel tank module (1) and the seal (2).
scientia non olet · About Mike's Workshop Manuals