Removal Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Pump Electrical Connector & Fuel Feed Line

Courtesy of GENERAL MOTORS CORP.

WARNING: Refer to Gasoline/Gasoline Vapors Warning .

Remove the fuel tank. Refer to Fuel Tank Replacement .
Disconnect the fuel pump electrical connector (1) and the fuel feed line (2). Refer to Plastic Collar Quick Connect Fitting Service .

Fig 2: Fuel Tank Module Lock Ring

Courtesy of GENERAL MOTORS CORP.

Use the J 45722: wrench by turning counter clockwise and remove the lock ring (1).

Fig 3: Fuel Transfer Hose Quick Connect Fitting

Courtesy of GENERAL MOTORS CORP.

Partially remove the primary fuel tank module in order to disconnect the fuel transfer hose quick connect fitting (1). Refer to Plastic Collar Quick Connect Fitting Service .

Fig 4: Primary Fuel Tank Module & Seal

Courtesy of GENERAL MOTORS CORP.

Remove the primary fuel tank module (1) and seal (2) from the fuel tank.