Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Line Bracket to Frame Nut | 10 N.m | 89 lb in |
| Brake Module to Bracket Nut | 10 N.m | 89 lb in |
| Brake Pipe Fittings | 15 N.m | 11 lb ft |
| Driveline and Front Suspension Frame to Body Bolts - Front | 160 N.m | 118 lb ft |
| Driveline and Front Suspension Frame to Body Bolts - Rear | 240 N.m | 177 lb ft |
| Engine Mount Nuts to Frame | 50 N.m | 37 lb ft |
| Front Lower Ball Joint Nut (Front and Rear) | ||
|
40 N.m | 30 lb ft |
|
plus 90 degrees | |
| Front Lower Control Arm Front to Frame Nut | 50 N.m plus 150 degrees turn | 37 lb ft plus 150 degrees turn |
| Front Lower Control Arm Rear to Frame Bolt | 50 N.m plus 120 degrees turn | 37 lb ft plus 120 degrees turn |
| Front Outer Tie Rod to Knuckle Nut | ||
|
30 N.m | 22 lb ft |
|
plus 120 degrees turn | |
| Front Stabilizer Shaft Bracket Bolts | 17 N.m | 13 lb ft |
| Front Stabilizer Shaft Link Nut | 49 N.m | 36 lb ft |
| Power Steering Gear to Frame Mounting Bolts | 50 N.m plus 120 degrees turn | 37 lb ft plus 120 degrees turn |
| Rear Adjuster Link to Frame Nuts | 115 N.m | 85 lb ft |
| Rear Adjuster Link to Knuckle Bolts | 140 N.m | 103 lb ft |
| Rear Frame Insulator Anchor Bolts to Body | 100 N.m plus 110 degrees turn | 74 lb ft plus 110 degrees turn |
| Rear Lower Control Arm to Knuckle Bolts | 40 N.m plus 120 degrees turn | 30 lb ft plus 120 degrees turn |
| Rear Lower Control Arm to Frame Nuts | 115 N.m | 85 lb ft |
| Rear Shock Lower Nut | 80 N.m plus 120 degrees turn | 59 lb ft plus 120 degrees turn |
| Rear Shock Mount to Body Bolts | 58 N.m | 43 lb ft |
| Rear Stabilizer Shaft Clamp Bolt | 22 N.m | 16 lb ft |
| Rear Stabilizer Shaft Link Nuts | 49 N.m | 36 lb ft |
| Rear Trailing Arm to Frame Bolts | 100 N.m | 74 lb ft |
| Rear Trailing Arm to Knuckle Bolts | 40 N.m plus 120 degrees turn | 30 lb ft plus 120 degrees turn |
| Rear Upper Control Arm Bushing to Control Arm Bolt | 160 N.m | 118 lb ft |
| Rear Upper Control Arm Bushing Bracket to Frame Bolts | 50 N.m plus 120 degrees turn | 37 lb ft plus 120 degrees turn |
| Transmission Mount Lower Nuts | 60 N.m | 44 lb ft |
| Transmission Support to Body Bolts | 58 N.m | 43 lb ft |
| Under Body Brace | 58 N.m | 43 lb ft |
| Upper Control Arm to Knuckle Bolt | 60 N.m plus 90 degrees turn | 44 lb ft plus 90 degrees turn |
| Washer Solvent Bottle Bracket Nut | 10 N.m | 89 lb in |