Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2011 >> Volt >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.4L (LUU) - DTC P0010 Through DTC P0328 >> DTC P0010 or P0013 >> Component Testing >> Static Test

Static Test

  1. Ignition OFF, disconnect the harness connector at the appropriate Q6 camshaft position actuator solenoid valve.
  2. Test for 5.0-9.0 Ω between the solenoid control terminal 2 and the low reference terminal 1 at the camshaft position actuator solenoid valve.
    • If not within the specified range, replace the Q6 camshaft position actuator solenoid valve.
  3. Test for infinite resistance between each terminal of the solenoid and the solenoid housing.
    • If not the specified value, replace the Q6 camshaft position actuator solenoid valve.
scientia non olet · About Mike's Workshop Manuals