Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2011 >> HHR LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Engine Controls And Fuel - 2.0L - Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Pump Module
    GM1636703Courtesy of GENERAL MOTORS CORP.
  1. Carefully slide the fuel level sensor into the slots on the reservoir.
  2. Slide the sensor down until the retaining tabs (2) engage the sensor.
  3. Install the fuel pump module. Refer to Fuel Pump Module Replacement .
scientia non olet · About Mike's Workshop Manuals