Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2011 >> HHR LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Engine Controls And Fuel - 2.0L - Introduction) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying APP Sensor Electrical Connector
    GM1633081Courtesy of GENERAL MOTORS CORP.
  1. Remove the insulator panel. Instrument Panel Insulator Replacement .
  2. Disconnect the accelerator pedal position (APP) sensor electrical connector (1).
    3. Fig 2: Identifying APP Sensor
    GM1633085Courtesy of GENERAL MOTORS CORP.
  3. Remove the APP sensor nuts.
  4. Remove the APP sensor.
scientia non olet · About Mike's Workshop Manuals