Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2011 >> HHR LS, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> DTC C0460 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, verify that DTC C0035, C0040, C0045, or C0050 is not set in the EBCM.
  2. Verify that DTC C0460 is not set in the PSCM.
    • If DTC C0460 is set in the PSCM, refer to DTC C0460 .
  3. With the scan tool perform the Steering Pos. Sensor Calibration. Refer to Steering Angle Sensor Centering .
  4. Clear DTC and operate the vehicle within the conditions for running the DTC. Verify the DTC does not reset.
scientia non olet · About Mike's Workshop Manuals