Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2011 >> Equinox LS, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement (LAF) >> Installation Procedure

Installation Procedure

    Fig 1: Battery Negative Cable, Engine Ground Nut & Washer
    GM2240867Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the battery negative cable engine ground nut (1) and washer (2) to the engine block stud and tighten to 30 N.m (22 lb ft).
    2. Fig 2: Battery Negative Cable Ground Nut & Body Harness
    GM2240861Courtesy of GENERAL MOTORS CORP.
  2. Install the battery negative cable frame ground nut (2) to the frame rail and tighten to 25 N.m (18 lb ft).
  3. Connect the body harness connector (1) to the battery current sensor.
  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  5. Reset the radio channel presets.
scientia non olet · About Mike's Workshop Manuals