Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2011 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.2L Or 7.0L - DTC P0016 Through DTC P0180 >> DTC P0033 >> Component Testing >> Dynamic Test

Dynamic Test

  1. Install a 3 A fused jumper wire between the ignition supply circuit terminal 1 and 12V. Install a jumper wire between the control terminal 2 and ground.
  2. Toggle the jumper wire between the control terminal and ground.
  3. Feel and listen for the operation of the Q36 supercharger bypass solenoid valve.
    • If the function does not perform as specified, replace the Q36 supercharger bypass solenoid valve.
scientia non olet · About Mike's Workshop Manuals