Windshield Wiper System Module Replacement

Fig 1: Windshield Wiper System Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the wiper arms. Refer to Windshield Wiper Arm Replacement . Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
1	Wiper System Module Bolts (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (89 lb in)
2	Wiper System Module Nut Tighten: 10 N.m (89 lb in)
3	Wiper Motor Nut (Qty: 3) Tighten: 10 N.m (89 lb in)
4	Wiper Drive System Module
5	Wiper Motor Tip: Disconnect the electrical connector.