Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2011 >> Chevy Express G2500, Van Cargo Extended, 6.6 L >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.6L (LGH) - Repair Instructions >> Repair Instructions >> Exhaust Temperature Sensor Replacement - Position 1 >> Removal Procedure

Removal Procedure

CAUTION:

The exhaust temperature sensor and exhaust pressure differential sensor line fittings may be difficult to remove when the engine exhaust system temperature is below 48°C (120°F). Excessive force may damage the threads in the exhaust manifold or exhaust pipe.

    Fig 1: Exhaust Temperature Sensor Electrical Connector
    GM1862628Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the exhaust temperature sensor electrical connector (2) from the engine wiring harness electrical connector (1).
    3. Fig 2: Exhaust Temperature Sensor
    GM1862635Courtesy of GENERAL MOTORS CORP.
  3. Remove the exhaust temperature sensor.
scientia non olet · About Mike's Workshop Manuals