Fastener Tightening Specifications
WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Floor Console Fastener | 2.5 N.m | 22 lb in |
| Front Floor Console Rear Cover Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Assembly Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Carrier Support Bracket Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Compartment Door Dampener Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Compartment Door Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Compartment Door Latch Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Driver Knee Bolster Energy Absorber Fastener | 2.5 N.m | 22 lb in |
| Instrument Panel Inflatable Restraint Fasteners | 22 N.m | 16 lb ft |
| Instrument Panel Tie Bar Assembly to the Vehicle Body | 25 N.m | 18 lb ft |
| Instrument Panel Tie Bar Assembly to the Vehicle Cowl | 9 N.m | 80 lb in |
| Instrument Panel Tie Bar Assembly to the Windshield Frame and Plenum Panel | 22 N.m | 16 lb ft |
| Instrument Panel Trim Pad Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Trim Plate Retainer Fastener | 2.5 N.m | 22 lb in |
| Instrument Tie Bar Assembly to the HVAC Module Assembly | 9 N.m | 80 lb in |
| Roof Console Fasteners | 2.5 N.m | 22 lb in |