Inspection/Maintenance (I/M) System DTC Table

System	DTCs Required to Set System Status to YES
If an inspection/maintenance system status indicator did NOT update to YES during the Inspection/Maintenance Complete System Set Procedure , review each indicator and reference this table to determine each DTC associated with the inspection/maintenance system status indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included within the conditions are additional DTCs which, if set, may inhibit the DTCs listed below from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will allow the inspection/maintenance system status indicators to transition to YES.
Catalyst	DTC P0420 or P0430
Evaporative Emission	DTC P0442 DTC P0446 DTC P0451-P0454 DTC P0455 Fuel Gauge Malfunction - DTC P0461-P0464 or P2066-P2068 DTC P0496
Oxygen Sensor	DTC P0131, P0132, P0137, P0138, P0151, P0152, P0157, or P0158 DTC P0133, P013A-P013F, P014A, P014B, P0153, P1133, or P1153 DTC P0134, P0140, P0154, or P0160 DTC P2270 or P2272 DTC P2271 or P2273
Oxygen Sensor Heater	DTC P0030, P0036, P0050, P0053, P0054, P0056, P0059, P0060, P0135, P0141, P0155, or P0161