Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Driver or Passenger Seat Lumbar Control Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Electrical Connectors
    GM1943633Courtesy of GENERAL MOTORS CORP.
  1. Install the lumbar support switch.
  2. Connect the electrical connectors.
  3. Install the outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
scientia non olet · About Mike's Workshop Manuals