Circuit/System Verification
NOTE:
Diagnose all other brake light DTCs or Symptoms prior to performing this diagnostic procedure.
- Ignition ON, verify that DTC C0277 is not present in the BCM.
- If DTC C0277 is present, refer to DTC C0277 or C0890 .
- Ignition ON, observe the stop lamps while applying and releasing the brake pedal. Verify the stop lamps operate properly.
- If the stop lamps do not operate properly, refer to Stop Lamps Malfunction .
- Replace the K17 Electronic Brake Control Module (EBCM) and verify the DTC does not reset.
- If the DTC resets, replace the K9 Body Control Module.