Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2011 >> Aveo LS, 4D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.6L (LXV) - Repair Instructions >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement (ECT 2) >> Installation Procedure

Installation Procedure

    Fig 1: ECT 2
    GM2049247Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the ECT 2 sensor (1) to the radiator.

    Tighten:  Tighten the ECT 2 sensor to 20 N.m (15 lb ft).

  2. Connect the ECT 2 sensor connector.
  3. Fill the engine coolant. Refer to Cooling System Draining and Filling .
  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About Mike's Workshop Manuals