Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2011 >> Aveo LS, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.6L (LXV) - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Crankshaft Position Sensor & Bolt
    GM2049259Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to Battery Disconnect Warning .
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the starter. Refer to Starter Replacement (1.4L LDT, 1.6 LXV) .
  3. Remove the CKP sensor bolt (1).
  4. Remove the CKP sensor (2).
scientia non olet · About Mike's Workshop Manuals