Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2010 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Rear Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front lower control arm assembly. Refer to Lower Control Arm Replacement .
    2. Fig 1: View Of Lower Control Arm In Soft Jawed Vise
    GM1853578Courtesy of GENERAL MOTORS CORP.
  2. Install the lower control arm in a soft jawed vise.
    3. Fig 2: Identifying Special Tools J 2619-01 & CH-48107
    GM1853579Courtesy of GENERAL MOTORS CORP.
  3. Assemble the J 2619-01  and the CH-48107  .
  4. Position the J 2619-01  and the CH-48107  lower control arm bushing.
  5. Using the J 2619-01  and the CH-48107  , remove the front lower control arm bushing.
    6. Fig 3: Identifying Special Tool J 5590
    GM1853576Courtesy of GENERAL MOTORS CORP.
  6. Using the J 5590  , remove the rear lower control arm bushing.
scientia non olet · About Mike's Workshop Manuals