Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
Always route the replacement cable the same way as the original cable.

Fig 1: Identifying Battery Negative Cable Extension Cable Clip

Courtesy of GENERAL MOTORS CORP.

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
Remove the engine wiring harness from the battery negative cable extension cable clip (2).

Fig 2: View Of Battery Negative Extension Cable Ground Bolt & Battery Negative Extension Cable Terminal

Courtesy of GENERAL MOTORS CORP.

Remove the battery negative cable extension cable ground bolt (2) from the cylinder head.
Reposition the battery negative cable extension cable terminal (1) from the cylinder head.

Fig 3: Identifying Battery Negative Extension Cable Ground Bolt & Battery Negative Extension Cable Clip

Courtesy of GENERAL MOTORS CORP.

Remove the battery negative cable extension cable ground bolt (1) from the left wheelhouse panel upper reinforcement.
Remove the battery negative cable extension cable clip (3) from the left upper engine compartment support bracket.
Remove the battery negative cable extension cable clip (4) from the front compartment side rail.

Fig 4: View Of Battery Negative Cable Extension Cable

Courtesy of GENERAL MOTORS CORP.

Remove the battery negative cable extension cable from the engine compartment.